
Fiberlock
10096 FIBERLOCK RECON SMOKE ODOR SEALER, WHITE,5-GALLON PAIL, ITEM 3092-5
- Stampede #
- 10096
- MFR #
- 3092-5
List$278.22Call for your pricingCall for availability
Call 214.235.0721
Financing available. Spread the cost or buy on Net 30 terms.See optionsThe full Fiberlock line is open.
We carry the Fiberlock line. Everything Fiberlock makes is orderable, not only the items published here.
Items we do not stock in Grand Prairie ship from the manufacturer. Lead time and minimums vary by line, and your rep confirms both before you commit.
Fiberlock RECON ULTRA Smoke Odor Sealer is a solvent-free encapsulant for eliminating malodors and blocking tough stains on multiple surfaces. It provides one-coat odor control and is suitable for structural, finished, and decorative surfaces.
The Fiberlock RECON ULTRA Smoke Odor Sealer is a solvent-free encapsulant designed to eliminate malodors and block tough stains on structural, finished, and decorative surfaces. It provides one-coat odor control on most surfaces, maintaining effectiveness through seasonal temperature and humidity changes. This product is part of a comprehensive smoke/odor management protocol, which includes odor cleaning, neutralization, and encapsulation. Fiberlock recommends cleaning with RECON Heavy Duty Cleaner or Extreme Duty Cleaner, followed by RECON Extreme Duty Odor Counteractant, before applying the sealer. The sealer can be applied with a brush, roller, or airless spray equipment. It is suitable for wallboard, sheetrock, wood, masonry, and concrete. Ferrous metals may require a direct-to-metal (DTM) primer to prevent flash rusting. The coverage rate varies by surface type: 200-400 square feet per gallon for smooth surfaces, and 100-200 square feet per gallon for porous surfaces. At 70°F and 50% relative humidity, the sealer is touch-dry in 30 minutes, with recoat and topcoat times of 2 hours each. Tools and drippings should be cleaned with warm soapy water before the sealer dries. Store in a dry place between 40°F and 90°F. Use adequate ventilation during application, and wear a NIOSH-approved respirator with any R, P, N, or HE filter when spraying.
